Matrox Avio F125 User Manual page 18

Connector
SFP+
USB 2.0
Debug
USB HID
VGA+DVI SL
VGA+DVI SL/DL
* While using a dual-link display resolution (such as 2560 x 1600) with the
connectors of your units, the
18 Matrox Avio Series – User Guide
Description
Use a Duplex LC-LC fiber optic cable to
connect your Avio transmitter and receiver units
to each other.While a fiber optic cable is
connected to the unit and your unit is plugged
in, the optical connection LED (
(green).
Connect your USB devices to this connector.
This USB connector is reserved for Matrox
technical support use only.
Connect only your USB HIDs (Human Interface
Devices, such as keyboard and mouse) to this
connector. A maximum of three (3) USB HIDs
can be connected to your receiver unit.
*
Connect your analog (VGA) monitor or digital
(DVI) single-link monitor to this connector.
Monitors attached to this connector on the
transmitter and receiver units use the same
display resolution and monitor settings.
*
Connect your analog (VGA) monitor or digital
(DVI) single-link or dual-link monitor to this
connector.
Monitors attached to this connector on the
transmitter and receiver units use the same
display resolution and monitor settings.
DVI SL and
) is active
DVI SL/DL and
VGA+DVI SL connectors are disabled.
Required host
connection
Main USB
TX: Main USB
RX: Main USB
or Dedicated
USB links
DVI-SL
DVI-SL/DL
VGA+DVI SL/DL