Table of Contents
Advertisement
Avio F120 Receiver – Back
Connector descriptions
Connector
12V DC power
input
Dedicated USB
links
DVI-D SL/DL
*
DVI-D SL
* While using a Dual-Link display resolution (such as 2560 x 1600) with the
connectors of your units, the
10 Matrox Avio Series – User Guide
Debug
Description
Connect the 12V DC power supply included
with your product to this connector. While the
12V DC power supply is connected to the unit
and electrical socket, the power LED (
active (green).
For host systems that don't support keyboards
and mice through a USB hub, connect your
host system to the dedicated mouse and
keyboard connectors on your transmitter unit to
support a keyboard and mouse on your receiver
unit. A USB A to mini-B cable is required to
connect to each of these connectors. To
purchase these cables, see the Matrox online
store (shopmatrox.com).
*
Using the DVI-D cable provided with your
transmitter unit, connect the primary graphics
connector of your graphics hardware to this
connector on your transmitter unit.
Note:
Your Avio unit only supports digital input
signals.
Using the DVI-D cable provided with your
transmitter unit, connect the secondary
graphics connector of your graphics hardware
to this connector on your transmitter unit.
Note:
Your Avio unit only supports digital input
signals.
DVI SL and
VGA+DVI SL/DL
SFP+
DVI SL/DL and
VGA+DVI SL connectors are disabled.
*
(remote)
VGA+DVI SL
12V DC
(remote)
power input
Required host
connection
) is
VGA+DVI SL/DL
Advertisement
Table of Contents
