GE KTD-405 User Manual page 30

26 KTD-405/KTD-405A Controller Keypad
User Manual
14. At the PROGRAM SOFT KEYS display, press and hold the seq key to return to the normal operating
display or press
15. Pressing
or iris key takes you to the CHANGE
ACCESS CODES display (Figure 27). If you
press +, the menus in Figure 27 will appear
in sequence. They allow you to change the
codes used to access the user, remote, and
supervisor menus.
The fourth display in the series allows
you to set the access code for the keypad
itself. The default value of zero means
that operation is normal. (That is, no
code is required.) Any other value means
that you must enter that number
followed by the Enter key in order to
have access to the keypad.
Access will time out after a period of
inactivity. The length of that period is set
at the display in Figure 30 on page 27.
The series of four displays is activated
only when you press + at the first display
in Figure 27. You can navigate forward
and backward within the displays
themselves, but these displays will not
appear when you navigate backward
from the BAUD RATE display.
Choosing - or
ACCESS CODES display.
.
-
or the side of the zoom, focus,
from the CHANGE
Figure 27. CHANGE ACCESS CODES displays
CHANGE ACCESS CODES?
(+)=YES (-)=NO
USER MENU ACCESS
CODE: 579
REMOTE PROGRAMMING ACCESS
CODE: 951
SUPERVISOR MENU ACCESS
CODE: 1476
LOCAL USER CODE 0
0=NORMAL
NEXT
NEXT
NEXT
NEXT
NEXT