20
KTD-405/KTD-405A Controller Keypad
User Manual
Programming modes
There are different programming modes for the keypad:
•
Supervisor programming mode: Establishes such essentials as the keypad's nonvolatile memory,
title and many fundamental operating parameters, and allows flexible system setup.
•
User programming mode: Establishes the keypad's system architecture for operations.
•
Remote device programming mode: Lets you program system devices such as cameras and VCRs.
Refer to the menu keys in Figure 14 ancd the navigation keys in Table 2 on page 20 while moving through the
programming menus.
Figure 14. Menu keys (gray keys are available on the KTD-405A only)
clear
Table 2.
Navigating the programming menus
Key
Function
displays the next menu
displays the previous menu
scrolls up when indicated by
scrolls down when indicated by
scrolls right when indicated by
scrolls left when indicated by
Joystick
scrolls up, down, left, or right when indicated by , , ,
seq
advances menus or exits menus if held for three seconds
1st
displays the previous menu
face
set
in the menus
in the menus
in the menus
in the menus
open
close
stop
badge
over
vol
in menus
talk
talk
last
Shaded keys are
only available
on KTD-405A.
vol