GE KTD-405 User Manual page 29

By changing the lowest user programmed preset from the deault 58 to a lower number, you can
make more presets available to keypad users.
Note: Pressing store then one of the four aux buttons prompts you to press store again, which sets the quick store
position. Pressing find then one of the four aux buttons recalls the quick store position.
Entering a new preset number or pressing
8. To change key assignments, press the + side
of the zoom, focus, or iris keys.
9. At the PRESS KEY TO PROGRAM display
(Figure 24), press any of the available
reprogrammable keys. You can also program
the shifted keys by holding the esc key and
pressing the key. (See
and commands on page 67.)
10. At the command selection display, use the joystick (or the
through the list of commands until you find the desired command. The commands are listed in
alphabetical order. Then press the
reprogrammed soft key.
Note: Pressing the
11. At the PRESS KEY TO PROGRAM display
(Figure 24), press any of the available
reprogrammable keys. (See
Reprogrammable keys and commands
page 67.)
12. At the CONFIRM COMMAND SELECTON
display, press the + side of the zoom, focus,
or iris key to confirm the assignment of the
command for the key or press
the PRESS KEY TO PROGRAM display.
13. The KEY HAS BEEN PROGRAMMED display flashes briefly, then the PRESS KEY TO PROGRAM
display (Figure 24) returns. If you want to reprogram additional keys, repeat the process from step 4.
Otherwise, press esc to exit to the PROGRAM SOFT KEYS display.
Reprogrammable keys
key (
key returns you to the PRESS KEY TO PROGRAM display.
on
to return to
will take you to the display shown in Figure 23.
Figure 23. PROGRAM SOFT KEYS display
PROGRAM SOFT KEYS?
(+)=YES (-)=NO
Figure 24. PRESS KEY TO PROGRAM display
PRESS KEY TO PROGRAM:
and
on the display) to save the selected command for the
Figure 25. Command selection display
SLW/STOP
( ) ( -)=SAVE
Figure 26. Confirm command selection display
SLW/STOP
(+)=CONFIRM
Programming
_
NEXT
ESC=EXIT
keys) to scroll up and down
- STABILIZ
BACK
- STABILIZ?
BACK
Chapter 3 25