Preset Pattern Saving And Routing Functions; To Recall A Saved Preset Video Routing Pattern; To Save The Current Video Routing Pattern To A Preset; Restoring Factory Defaults - Black Box AC1120A User Manual

Model AC1120A, AC1121A, AC1122A, AC1123A
Response:
CAn,m<cr>
CVn,m<cr>
Note: If the system does not have audio, it will still accept this command but
response will be missing audio tie line.

3.2.3 Preset Pattern Saving and Routing Functions

3.2.3.1 To recall a saved preset Video routing pattern:

PRx<cr>
Command:
x = preset # can be 1 to 16
Response:
PRx<cr>
CVn ,m <cr>
1 1
CVn ,m <cr>
2 2

3.2.3.2 To save the current Video routing pattern to a preset:

PSx<cr>
Command:
x = preset # can be 1 to 16 (unit should accept leading zero)
Response:
PSx<cr>

3.2.4 Restoring Factory Defaults

To restore factory defaults:
FR<cr>
Command:
Are you sure (Y,N)?<cr>
Response:
Note: You have 5 seconds to press Y, or the command is cancelled.
Factory defaults restored<cr>
Cancelled<cr>
Note:
Restore Factory command will clear all ties, presets, schedule settings, and
unit name. All LEDs on the front panel should flash when units executes factory
defaults command.

3.2.5 Rebooting the System

To perform a system reset/reboot (same effect as cycling AC power):
FB<cr>
Command:
Response:
Are you sure (Y,N)?<cr>
Note: You have 5 seconds to press Y, or the command is cancelled.
18
stands for Preset Recall
stands for Preset Save
stands for Factory Restore
if other key was entered or command times out.
stands for Firmware Boot
if the "Y" was entered.