Viewing Ties By Video Only - Black Box AC1120A User Manual

8x8 and 16x16 VGA / HDTV Matrix Switch with Audio, RS232 & IP Control
Press and release any output button, the backlit LED of that button will light, and
if that output's video and audio are tied to one particular input, that input LED
will also light.
Note:
If there is audio breakaway, the input LED will not be lit
You can now use the ▲ and ▼ buttons to quickly go through all outputs.
You can also make new ties by hitting another input button. New ties will not take
effect unless ENTER is hit (see next section).
When you are done viewing ties, to exit you can hit ENTER. If you don't hit any
buttons, then after 8 sec the view function times out and all the input and output
LEDs will go out.

3.1.1.2 Viewing ties by Video only

Press and release the AUD and/or VID buttons so that the backlit LED of the VID
button is lit and the AUD button is off
At this point you have to decide if you want to view from the point of view of the
input side or the output side.
... To View from input side
Press and release any Input button, the backlit LED of that button will light, and
all the backlit LEDs for the outputs whose video is currently tied to this input will
also light up solid.
You can now use the ▲ and ▼ buttons to quickly go through all inputs.
You can also make new ties by hitting output buttons. New ties will not take
effect unless ENTER is hit (see next section).
When you are done viewing ties, to exit you can hit ENTER. If you don't hit any
buttons, then after 8 sec the view function times out and all the input and output
LEDs will go out.
... To View from output side
Press and release any output button, the backlit LED of that button will light, and
if that output's video is tied to any input, that input LED will also light.
You can now use the ▲ and ▼ buttons to quickly go through all outputs.
You can also make new ties by hitting another input button. New ties will not take
effect unless ENTER is hit (see next section).
11