Table of Contents
Advertisement
2.2 RS-232 Port & ALARM I/O
1.
RS-485 D-
2.
RX: This pin is one of the RS-232 pins. It connects with the TX pin of another device.
3.
TX: This pin is one of the RS-232 pins. It connects with the RX pin of another device.
Please refer to the note below on the standard RS-232 9 Pin Cable with Pin 2 and
Pin 3 exchanged; see the pin configuration chart below for details.
4.
RS-485 D+
5.
GND: Ground contact.
6.
ALARM RESET (INPUT): This pin connects to an alarm-clear device for clearing an
alarm. (
7.
ALARM IN (INPUT): This is an alarm input that can be programmed in the menu
system to active low. (
8.
ALARM OUT (OUTPUT): This is an alarm output trigger. Connect this to external
devices such as buzzers or lights. (
9.
AUDIO OUT: This provides the unit's audio signal to a speaker.
The pin configuration chart:
1 2 3 4 5
6
7
8
5V, 20mA
)
0V(Active)
5V, 20mA
)
0V(Active)
9
9
5V, 20mA
)
0V(Active)
Advertisement
Table of Contents
