Table of Contents
Advertisement
4.
Select the connecting port. The RS-232 communication port functions as a connector to an
external control device. The RS-485 communication ports function as connectors when two
or more units are serially connected to an external control device.
5.
Upon the buttons being clicked, a camera will move one short step only in any of the four
designated directions.
6.
Click the buttons to control the Focus setting on the Speed Dome Controller. Click "+"
button to focus far and click the "–" button to focus near.
7.
Click the buttons to control the Zoom setting on the Speed Dome Controller. Click "+" button
to zoom in and click the "–" button to zoom out.
8.
Upon the buttons being clicked, a camera will turn all the way, without stopping, in one of
the four designated directions.
9.
Click the buttons to control the Aperture setting on the Speed Dome Controller.
54
Advertisement
Table of Contents
