Table of Contents Overview Saving SNC easy IP setup software to your PC................3 Assigning the IP Address to the Camera .... 3 SNC easy IP setup function ....... 4 Configuring Windows Firewall......6 When using Windows 7 ........6 When using Windows Vista .......
Assigning the IP Address to the Camera This instruction manual is for SNC easy IP setup, the software for assigning an IP address to Sony network To connect the camera to a network, you need to assign cameras. a new IP address to the camera when you install it for the first time.
Start SNC easy IP setup. Set the DNS server address. The network cameras connected to the local network are detected and listed on the main screen. To obtain the DNS server addresses automatically: Select Obtain DNS server address automatically. To specify the DNS server addresses manually: Select Use the following DNS server address, and type the Primary DNS server address and Secondary DNS server address in the relevant...
1 Camera list IP address of NIC Displays a list of the detected cameras. Displays the IP address of the NIC (Network Interface Card) detected. 2 IP configuration Set the IP of the selected camera. 2 IP configuration 3 DNS configuration Set the DNS of the selected camera.
Secondary DNS server address Configuring Windows Enter the secondary DNS server address. Firewall 4 Port configuration When using Windows 7 HTTP port No. Configuring Windows Firewall Use the port No. 80 or specify another port number SNC easy IP setup may not operate correctly depending (between 1024 and 65534).
Page 7
Select Disable Windows Firewall. Select Allow another program..The cameras will be displayed in the list. Add program. To turn Windows Firewall on Select Control Panel from the Start menu of Windows. Click Windows Firewall. Select Allow a program or feature through Windows Firewall.
If the Add Program dialog appears, select SNC easy When using Windows Vista IP setup and click OK. Configuring Windows Firewall SNC easy IP setup may not operate correctly depending on the configuration of Windows Firewall. (No cameras are shown in the list even if they are detected.) In this case, confirm the Windows Firewall configuration as follows: Select Control Panel from the Start menu of...