Table of Contents
Advertisement
1. Device Setting page
2. Image Setting page
NOTE: The IP Surveillance software connects the Internet to a LANCAM. There may be a
problem if the bandwidth is not enough, in which case the speed rate of the image
transmissions may become too low. So if you want a satisfactory speed rate in your displays,
you can click the "Device Setting" button, opening a "Device Setting" screen, set the settings of
the Device page where you can change the "Audio Mechanism" function to "OFF". Turning it
"OFF" will save the bandwidth from wastage, and improve the image display.
3. Alarm Setting page
4. SD-card Setting page
68
Advertisement
Table of Contents
