Table of Contents
Advertisement
5.1.8 PPPoE & DDNS
Using the PPPoE
1.
Install the XDSL software (obtained from your ISP dealer) in your PC.
2.
Search your LAN CAMERA's IP address: you can use your Network Viewer's Scan IP
program, or just connect the LAN CAM and the Video monitor. The monitor screen will show
the IP address on its right side.
3.
Change the switch on the LAN CAM's side panel to position # 4.
4.
Installing an IP address in your PC or notebook.
Desktop → Move the mouse focus to the Network neighborhood and click the right key of the
mouse → Choose the properties → Choose your local connection → Choose the properties
and select the configuration → Select the TCP / IP → Choose the properties → Type in the
IP address in a four-part formula, for example "192. 168. 1.101" (the first three parts must be
identical to the above numbers, only the last part can be changed to your own number, which
must never exceed 255) → Click the mask and the mask input, namely "255. 255. 255. 0" (a
fixed formula) → Click "OK" → Click "OK".
Desktop → Choose IE browser → Type in the LAN CAMERA IP address in the URL (check
5.
step # 2 above) → Enter → LAN CAM images will appear.
PPPoE Settings
Enter the LAN CAMERA home page → Choose the network → Type in "User Name: admin"
1.
and "Password: 9999" → Click "OK'.
Choose PPPoE → PPPoE mode: Select "ON" → Type in "Account" → Type in "Password"
2.
→ Submit → Unplug the power connection.
3.
Plug in the LAN CAMERA and it will receive an IP address from the ISP dealer (this IP
address is dynamic --- every time you unplug and plug in again you'll get a new IP address).
55
Advertisement
Table of Contents
