Table of Contents
Advertisement
LVDS Panel Type
This setting specifies the resolution of the LVDS panel.
LVDS Backlight Control
This setting controls the brightness level of the LVDS panel backlight.
Integrated Peripherals
EIDE Primary Master/Slave PIO
The EIDE PIO (Programmed Input/Output) fields let you set a PIO mode for the
EIDE devices that the onboard EIDE interface supports. Modes 0 through 4 pro-
vide successively increased performance. In [Auto] mode, the system automati-
cally determines the best mode for each device.
EIDE Primary Master/Slave UDMA
Ultra DMA 33/66/100/133 implementation is possible only if your EIDE hard drive
supports it and the operating environment includes a DMA driver (Windows ME,
XP or a third-party EIDE bus master driver). If your hard drive and your system
software both support Ultra DMA/33, Ultra DMA/66, Ultra DMA/100 and Ultra
DMA/133, select [Auto] to enable BIOS support.
*** On-Chip Serial ATA Setting ***
On-Chip Serial ATA
This setting specifies the function of the on-chip SATA controller.
[Disabled]
[Auto]
[Enhanced Mode]
Disable SATA controller
Automatically determined by BIOS
Enable both SATA and PATA, max. 6 EIDE
drives supported
BIOS Setup
3-11
Advertisement
Table of Contents
