Table of Contents
Advertisement
AIMB-253 Mainboard
Memory
The mainboard provides one 240-pin non-ECC DDRII 533/667 DIMM slot and sup-
ports up to 2GB system memory.
DDRII
240-pin, 1.8V
Installing DDRII Modules
1. The memory module has only one notch on the center and will only fit in the right
orientation.
2. Insert the memory module vertically into the DIMM slot. Then push it in until the
golden finger on the memory module is deeply inserted in the DIMM slot.
Important
You can barely see the golden finger if the memory module is properly inserted in
the DIMM slot.
3. The plastic clip at each side of the DIMM slot will automatically close.
2-6
64x2=128 pin
Single-Channel: All DIMMs in GREEN
Volt
56x2=112 pin
Notch
Advertisement
Table of Contents
