Monitor:card - HP E1366A User Manual

:MONitor:CARD

Parameters
Comments
Example
44 HP E1366A/E1367A RF Multiplexers Command Reference
DISPlay:MONitor:CARD <
switchbox to be monitored.
Parameter Name
< number > | AUTO
Selecting a Specific Module to be Monitored: Use the
DISPlay:MONitor:CARD
the switchbox to be monitored.
Selecting the Present Module to be Monitored: Use the
DISPlay:MONitor:AUTO
addressed by a switching command (e.g.,
*RST Condition:
Select Module #2 in a Switchbox for Monitoring
DISP:MON:CARD 2
number selects the module in a
> | AUTO
Parameter Type
numeric
command to send the module number for
command to select the last module
[ROUTe:]CLOSe
DISPlay:MONitor:CARD AUTO
! Selects module #2 in a switchbox
Range of Values
1-99
).
Chapter 5