Cpon - HP E1366A User Manual

Parameters
Comments
Example

:CPON

Parameters
Comments
Example
Chapter 5
Parameter Name
<number>
RF Multiplexers Model Number:
The
SYSTem:CTYPe? <
"
HEWLETT-PACKARD,E1366A,0,A.01.00
returns "
HEWLETT-PACKARD,E1367A,0,A.01.00
(E1367A), where the
module serial number (always 0) and
of the module revision code number.
Reading the Model Number of a Card #1 Module
SYST:CTYP? 1
SYSTem:CPON < number
switchbox to its power-on state.
Parameter Name
<number>
RF Multiplexers Power-On State: The power-on state is all
channels (relays) open. Note that
modules in a switchbox, while
in only the module (card) specified in the command.
Setting Card #1 Module to its Power-on State
SYST:CPON 1
HP E1366A/E1367A RF Multiplexers Command Reference
Parameter Type
numeric
number command returns
>
" " after "
0 E1366A
"
A.01.00
! Return the model number
> | ALL sets the selected module (card) in a
Parameter Type
numeric
*RST opens all channels of all
SYSTem:CPON
! Sets module #1 to power-on state
Range of Values
1-99
" (E1366A), or
"
" or " " is the
E1367A
" is an example
Range of Values
1-99
opens the channels
55