Scan - HP E1366A User Manual

SCAN

Parameters
Comments
Example
Chapter 5
channel_list
[ROUTe:]SCAN <
channel_list has the form (@ccnn) where cc = card number (01-99) and
nn = channel number (00-03 and 10-13).
Parameter Name
<channel_list>
Defining Scan List: When executing
list is checked for valid card and channel numbers. An error is
generated for an invalid channel list.
Scanning Channels: You can scan single channels (@ccnn);
multiple channels (@ccnn,ccnn,...); sequential channels
(@ccnn:ccnn); groups of sequential channels
(@ccnn:ccnn,ccnn:ccnn); or any combination.
Scanning Operation: When a valid channel list is defined,
INITiate[:IMMediate]
the channel list. Successive triggers from the source specified by
TRIGger:SOURce
Stopping Scan: See the
Related Commands:
*RST Condition: All channels open.
Scanning Using External Devices
See Chapter 4, " Example: Scanning With External Device" or " Example:
Scanning Using "Trig Out" and "Event In" Ports" for example scanning
programs using external instruments.
HP E1366A/E1367A RF Multiplexers Command Reference
defines the channels to be scanned. The
>
Parameter Type
numeric
[ROUTe:]SCAN
begins the scan and closes the first channel in
advances the scan through the channel list.
command.
ABORt
TRIGger , TRIGger:SOURce
Range of Values
cc00-cc03, cc10-cc13
, the channel
51