Table of Contents
Advertisement
Example: Standard
Switching
26
Using the HP E1366A/E1367A RF Multiplexer Module
This example connects channel 02 to com 00 of an RF multiplexer in
standard configuration. The multiplexer is defined as a single-multiplexer
switchbox instrument. See the following figure for typical user
connections. To connect channel 02 to com 00, execute:
CLOS (@102)
To open the channel, use
Figure 3-1. Standard Switching
! Connect channel 02 to com 00.
1 is the card number and 02 is the
channel number.
.
OPEN (@102)
Chapter 3
Advertisement
Table of Contents
