Source - HP E1366A User Manual

:SOURce

Parameters
Comments
Chapter 5
TRIGger:SOURce BUS | EXTernal | HOLD | IMMediate
trigger source to advance the channel list during scanning.
Parameter Name
BUS
EXTernal
HOLD
IMMediate
Enabling the Trigger Source: The
only selects the trigger source. The
enables the trigger source.
Using the
TRIG
advance the scan when
TRIGger:SOURce BUS
Using External Trigger Inputs: With
selected, only one switchbox at a time can use the external trigger
input at the HP E1300A/E1301A mainframe " Event In" BNC port.
The trigger input is assigned to the first switchbox that requested the
external trigger source (with a
command).
Assigning External Trigger: A switchbox assigned with
TRIGger:SOURce EXTernal
switchbox trigger source is changed to
When the source is changed, the external trigger source is available
to the next switchbox which requests it (with a
TRIGger:SOURce EXTernal
external trigger input already assigned to another switchbox an error
is generated.
Using Bus Triggers: To trigger the switchbox with
TRIGger:SOURce BUS
command *TRG
command.
Trig Out Port Shared by Switchboxes: See the
command.
Related Commands:
*RST Condition:
HP E1366A/E1367A RF Multiplexers Command Reference
Parameter Type
discrete
discrete
discrete
discrete
TRIGger:SOURce
INITiate[:IMMediate]
Command: You can use
TRIGger:SOURce HOLD
is selected.
TRIGger:SOURce EXTernal
TRIGger:SOURce EXTernal
remains assigned to that source until the
BUS
command). If a switchbox requests an
selected, use the IEEE 488.2 common
or the HP-IB Group Execute Trigger (
ABORt , [ROUTe:]SCAN
TRIGger:SOURce IMMediate
specifies the
Range of Values
*TRG or GET command
"Event In" BNC port
Hold triggering
Immediate triggering
command
command
to
TRIGger[:IMMediate]
or
, , or .
HOLD IMMediate
GET )
OUTPut
, TRIGger
57