Example: Tree Switching - HP E1366A User Manual

Example: Tree
Switching
Chapter 3
This example uses two RF multiplexers in a tree configuration to connect
com 10 of multiplexer #1 with channel 12 of multiplexer #2. The two
multiplexers form a multiple-multiplexer switchbox instrument with
multiplexer #1 as card 01 and multiplexer #2 as card 02. See the following
figure for typical user connections. To make this connection, execute:
CLOS (@112,212)
To open the channels, use
Figure 3-2. Tree Switching
Using the HP E1366A/E1367A RF Multiplexer Module
! Connect com 10 of multiplexer #1
to channel 12 of multiplexer #2.
OPEN (@112,212) .
27