Table of Contents
Advertisement
10-byte version
7
0
1
(MSB)
2
6
7
(MSB)
8
9
CDB fields:
PF
SP
Parameter List
Length
Specific status:
Following a successful Mode Select command, Unit Attention status is posted to all initiators other
than the initiator of the Mode Select command. The sense key is set to
sense is set to 2A01h (mode parameters changed).
Mode parameter pages
Mode data is recovered from the drive by means of a
it is returned to the drive via a
and return whatever
SENSE
72
Commands
6
5
Operation Code (55h)
Reserved (0)
Page Format
0
The
MODE SELECT
the parameter header and block descriptor may be sent.
1
The parameter data is SCSI-2 mode-page compatible.
Save Pages
0
This bit is not supported and must be zero.
0
No data is transferred.
>0 The length in bytes of the
MODE SELECT
MODE SELECT
4
3
PF
Reserved (0)
Reserved (0)
Parameter List Length
Control
parameter data is not SCSI-2 mode page compatible. Only
parameter list to be transferred.
MODE SELECT
MODE SENSE
command. In real-life, many hosts do not use
data suits them into the drive.
2
1
0
SP (0)
(LSB)
(LSB)
. Additional
UNIT ATTENTION
command. After modification,
MODE
Advertisement
Table of Contents
