Table of Contents
Advertisement
The Status bytes that the drive returns are as follows:
GOOD: This status indicates that the drive has successfully completed the command.
00h
02h
CHECK CONDITION: Any error, exception, or abnormal condition that causes sense data to be
set returns CHECK CONDITION. The REQUEST SENSE command should be sent following
this status to determine the nature of the error.
04h
CONDITION MET: This status will never be returned by an HP Ultrium tape drive.
BUSY: The drive is unable to execute the command at this time. Try again later. The drive tries
08h
to avoid using this status code during normal operation. It can sometimes be used after
commands have been aborted, during power-on and if there are multiple selecting initiators.
10h
INTERMEDIATE: This status will never be returned by an HP Ultrium tape drive.
14h
INTERMEDIATE CND: This status will never be returned by an HP Ultrium tape drive.
RESERVATION CONFLICT: Returned if the drive is reserved by another party. See the
18h
Reservation check.
22h
COMAND TERMINATED: This status will never be returned by an HP Ultrium tape drive.
28h
QUEUE FULL
Status
27
Advertisement
Table of Contents
