Subwoofer Dsp Control Menu - Electro-Voice ETX-10P User Manual

ETX Powered Loudspeakers
RESET FACTORY SETTTINGS Menu
The Reset Factory Settings menu is used to reset the loudspeaker to original factory settings.
Available options for this selection are: NO or YES. The default selection is NO.
To reset the system to original factory settings, do the following:
1.
2.
INFORMATION Menu
The Information menu is used to display the preset version, firmware version, and build date.
4.5.2

Subwoofer DSP control menu

The subwoofer DSP control menu selections are available for the ETX-15SP and ETX-18SP
subwoofers.
EXIT Menu
The Exit menu is used to return to the home screen.
Notice!
The display returns to the home screen after two (2) minutes of inactivity.
FUNCTION Menu
The Function is used to configure the type of sound the subwoofer delivers. Available options
for this selection are: MUSIC and LIVE.
▪
▪
LOCATION Menu
The Location menu is used to control output of the subwoofer when used in arrays with other
subwoofers. Available options for this selection are: NORMAL and CARDIOID.
▪
▪
To set up cardioid, do the following:
1.
2014.02 | 03 | F.01U.276.083
From the DSP menu, select RESET FACTORY SETTINGS.
The restore factory settings message appears.
Select YES.
The loudspeaker restarts and resets the system to the original factory settings.
MUSIC – is used for recorded music playback and EDM applications. (Default)
LIVE – is used for live sound applications.
NORMAL – is used for a single subwoofer, or an array of subwoofers where the desired
output is effectively omnidirectional. This setting should also be used for the front firing
subwoofers in a cardioid array. Under most circumstances, the subwoofer should be set
to NORMAL. (Default)
CARDIOID – should ONLY be used on the rear firing subwoofers in cardioid arrays.
From the DSP menu, scroll to LOCATION.
User Manual Electro-Voice