Electro-Voice ETX-10P User Manual page 26

ETX Powered Loudspeakers
Subwoofer control and monitoring interface
The subwoofer DSP control menu selections are available for the ETX-15SP and ETX-18SP.
Figure 4.13: Subwoofer amplifier panel
1.
2.
3.
4.
5.
6.
2014.02 | 03 | F.01U.276.083
LCD – DSP control and monitoring interface.
MASTER VOL – Adjusts the sound level.
DSP – Scroll through and select the available menu selections. Push and hold the
MASTER VOL knob to enter the DSP menu. For more information, see DSP controls, page
28.
INPUT – Balanced input for the connection of signal sources like mixing consoles,
instruments, or microphones. Connections can be established using ¼-inch TRS or XLR
connectors.
OUTPUT – XLR output sends the input signal to another loudspeaker or subwoofer.
INPUT 1 is linked to OUTPUT 1 and INPUT 2 is linked to OUTPUT 2. The MASTER VOL or
DSP control settings do not affect MIX OUTPUT.
POWER – AC switch or switching the power ON or OFF. The LCD screen lights up when
the POWER is turned ON.
MAINS IN – AC connection is established via an IEC-connector.
User Manual Electro-Voice