Subwoofer Dsp Control Menu - Electro-Voice ELX200-10P-US Installation Manual

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Bosch Security Systems, Inc. is under license. Other trademarks
and trade names are those of their respective owners.
Turning Bluetooth® ON or OFF
To turn Bluetooth® ON or OFF, do the following:
1.
2.
RESET Menu
The Reset menu is used to reset the loudspeaker to original factory settings. Available options
for this selection are: NO or YES.
The default is NO.
Resetting the system
To reset the system to original factory settings, do the following:
1.
2.
Notice!
The reset menu item is used to revert the loudspeaker to the original factory default settings.
All user settings will be deleted. The user customized settings in the STORE and RECALL
menus return to <EMPTY>.
INFO Menu
The Information menu is used to display the product name and firmware version.
5.3.2

Subwoofer DSP control menu

The subwoofer DSP control menu selections are available for the ELX200-12SP and
ELX200-18SP subwoofers.
EXIT
MODE
LOW PASS
Electro-Voice
From the DSP menu, scroll to CONTROL APP.
Select ON.
OR
Select OFF.
From the DSP menu, select RESET.
The reset "Are you sure?" message appears.
Select YES.
The loudspeaker restarts and resets the system to the original factory settings.
Installation manual
en
MUSIC (Default)
LIVE
CLUB
80Hz
100Hz (Default)
120Hz
150Hz
ELX200-10P
ELX200-12P
ELX200-15P
ZXA1
2017.06 | 01 | F.01U.326.891
27