Electro-Voice ETX-10P User Manual page 18

ETX Powered Loudspeakers
Tripod or pole mount
ETX-10P, ETX-12P, and ETX-15P loudspeakers mount on a tripod stand or on a pole above a
subwoofer.
Mounting a loudspeaker on a tripod stand
Figure 4.2: Full-Range models on tripod stand
Caution!
! Tripod is not evaluated for safety with this loudspeaker. Check the specifications of the tripod
stand to be certain it is capable of supporting the weight of the loudspeaker.
Caution!
Two (2) person lift and placement is recommended for the heavier loudspeakers. Single
!
person lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker on a tripod stand, do the following:
1.
2.
3.
Figure 4.3: Multi-angle pole cup 0° (left) and multi-angle pole cup 7.5° (right)
2014.02 | 03 | F.01U.276.083
Place the tripod stand on a level stable surface.
▪
Fully extend the legs on the tripod stand.
▪
Do not compromise the tripod stands structural integrity by trying to make the stand
taller.
▪
Do not attempt to suspend more than one (1) loudspeaker on a stand designed for a
single loudspeaker.
Using two (2) hands lift the loudspeaker.
Set the multi-angle pole cup located on the bottom of the loudspeaker onto the pole.
User Manual Electro-Voice