Full-Range Loudspeaker Dsp Control Menu - Electro-Voice ETX-10P User Manual

Etx powered loudspeakers
Hide thumbs Also See for ETX-10P:
Table of Contents

Advertisement

4.5.1

Full-Range loudspeaker DSP control menu

The full-range loudspeaker DSP control menu selections are available for the ETX-10P,
ETX-12P, ETX-15P, and ETX-35P loudspeakers.
EXIT Menu
The Exit menu is used to return to the home screen.
Notice!
The display returns to the home screen after two (2) minutes of inactivity.
FUNCTION Menu
The Function menu is used to configure the type of sound the loudspeaker delivers. Available
options for this selection are: MUSIC, LIVE, and SPEECH.
LOCATION Menu
The Location menu is used to optimize the loudspeaker for different boundaries.
ETX-10P, ETX-12P, and ETX-15P: Available options for this selection are: TRIPOD, MONITOR,
WALL, and SUSPEND. ETX-35P: Available options for this selection are: TRIPOD, ARRAY, WALL,
and SUSPEND.
Electro-Voice
MUSIC – is used for recorded music playback and EDM applications. (Default)
LIVE – is used for live sound applications.
SPEECH – is used for spoken word applications.
TRIPOD – is used when the loudspeaker is placed on a tripod stand or placed on a pole.
(Default)
MONITOR – is used when the loudspeaker is placed on the angled monitor panel in
monitor position (Available for the ETX-10P, ETX-12P, and ETX-15P). This setting
compensates for the amount of low frequency boost created by placing the speaker close
to the floor.
ARRAY – is used when the loudspeaker is part of an array, two (2) boxes side by side
using the array bracket kit (Available for the ETX-35P; Array Bracket Kit accessory sold
separately). This setting compensates for the effects of placing two (2) loudspeakers in
an array.
WALL – is used when the loudspeaker is mounted to the wall using the mounting bracket
(Mounting Bracket accessory sold separately). This setting compensates for the amount
of low frequency boost created by placing the loudspeaker close to the wall. If used on a
column, it is recommended to use the SUSPEND mode.
SUSPEND – is used when the loudspeaker is suspended in a 3-point suspension by
eyebolts. For more information, see Suspension, page 21.
User Manual
en
29
2014.02 | 03 | F.01U.276.083

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Etx-12pEtx-15pEtx-35pEtx-15spEtx-18sp

Table of Contents