Electro-Voice ETX-10P User Manual page 19

Mounting a loudspeaker on a pole
Figure 4.4: Full-Range/sub stack with pole mount
Caution!
Two (2) person lift and placement is recommended for the heavier loudspeakers. Single
!
person lift and placement of heavier loudspeakers could cause injury.
To mount a loudspeaker above a subwoofer on a pole, do the following:
1.
2.
3.
4.
5.
Electro-Voice
Place the subwoofer on a level stable surface.
Insert the M20 threaded pole into the combo pole cup on the top of the subwoofer.
Turn the pole
clockwise
Turn the M20 threaded pole clockwise to secure the pole to the subwoofer.
Using two (2) hands lift the loudspeaker.
Set the multi-angle pole cup located on the bottom of the loudspeaker onto the pole.
User Manual
en 19
2014.02 | 03 | F.01U.276.083