Lennox icomfort Setup Manual page 15

After the tests have been started, the screen will describe which test is
running (see figure 20). After concluding that the results are the desired
results for any test, press next (if using TEST ALL) to proceed to the next
test or done (if running a single test).
TEST ALL example
CURRENT TEST: Blower
Check Blower Operation
single test example
CURRENT TEST: Blower
Check Blower Operation
Figure 20. Typical tests results screens
After pressing done, the Testing finished" screen will appear (see figure
21). At this point, use the EXIT tab (if you are finished with all setup), or
use diagnostics tab (to analyze the system), or use equipment tab (if
you wish to make any changes to device details).
cancel
next
cancel
done
Page 15
setup tests
The Testing Process is Finished
press the 'tests' tab to run more tests.
press the 'EXIT' tab to start normal operation.
alerts
Figure 21. Testing finished screen
icomfortt Touch Screen 7−Day Programmable Thermostat
Tests − Page 1 of 1
equipment HELP
diagnostics EXIT