Oki C9800hdtn Configuration Manual page 110

5
5-10 Setting up the Fiery from a Windows Computer
To set the subnet mask, enter one of the following values:
255.0.0.0 if the IP address starts with a number less than 128
255.255.0.0
255.255.255.0
Confirm the subnet mask setting with your network administrator before
N :
OTE
proceeding. In some cases, the required setting may be different from those listed.
If your TCP/IP network has a gateway and users outside the gateway plan to print to
the Fiery using TCP/IP, enter the gateway address.
The Fiery stores assigned IP addresses, even if you later disable TCP/IP.
N :
OTE
If you must assign the Fiery IP address to another device, first set the Fiery address to a
null address.
AppleTalk
The current AppleTalk zone is displayed in the Protocol2 tab.
if the IP address starts with a number from 128 through 191
if the IP address starts with a number greater than 191