Passwords From The Control Panel - Oki C9800hdtn Configuration Manual

7
7-3 Setting passwords

Passwords from the Control Panel

For more information on Administrator access privileges, see
information on controlling print jobs with the job management tools, see the
Job Management
The Operator password can be set and changed only from Fiery WebSetup, or
N :
OTE
Command WorkStation.
T F
O CHANGE THE IERY PASSWORD
1. Scroll through the main Setup menu and choose Change Password.
2. Enter and confirm the password, as follows.
New Password
Use the and
next character position. When the last character has been entered (ENTER key
pressed) password entry is complete. The password can be any combination of letters
and numbers up to 19 characters.
Caution: If you decide to set an administrator password make sure you keep a
careful note of it. If you lose or forget this password it cannot be
recovered for you, and the internal hard disk drive containing the
operating system and all settings will need to be replaced.
Verify New Password
Reenter the new password, exactly as you entered it initially. If you make a mistake,
you are prompted to enter the password again. The new password is effective after you
save changes and restart the Fiery.
Guide.
keys to select the characters and the ENTER key to advance to the
page 3-3. For