Oki C9800hdtn Configuration Manual page 37

2
2-13 Fiery on a NetWare network
Setting up a NetWare print queue for bindery
For NetWare in emulation mode, the NetWare print server and print queue for
the Fiery are created and configured from NetWare Print Console (PCONSOLE), a
NetWare utility that is stored in the NetWare PUBLIC directory.
As with NDS, you can create several NetWare entities on a Novell server, and you can
then select them in Network Setup.
Setting up NetWare Windows clients for printing
Before setting up client workstations for printing, perform Network Setup (see
page 4-7), and verify that the settings reflect the entities you created in the NetWare
administrator utilities (see
For printing to the Fiery, connect all Windows clients to a NetWare server and
N :
OTE
permit them to connect to the Netware print server or servers on which you defined a
NetWare print queue for the Fiery.
After the Novell server and the Fiery have been set up, client setup consists of:
• Installing the networking protocol, binding it to the network adapter card, and
permitting the client to log in to the NetWare file server.
On Windows 98/Me workstations, load both the IPX/SPX-compatible protocol and
the Client for NetWare Networks from the Network Control Panel.
On Windows NT 4.0/2000/XP/Server 2003 workstations, install Client Services for
NetWare. Use the CSNW option in the Control Panel to set printing options and
specify a preferred NetWare server.
• Setting up the Fiery as a PostScript printer by installing a PostScript printer driver
and the Fiery PPD (PostScript printer description).
• Adding a network port and connecting the workstation to one or more NetWare
queues that have been defined for the Fiery.
• Installing Fiery software, such as colour reference files.
For details, see the
page 2-10).
User Software Installation Guide.