Prerequisites; Installing The Router In A Rack - Cisco ASR 903 Hardware Installation Manual

Installing the Cisco ASR 903 Router
This chapter describes how to install the Cisco ASR 903 Router and includes the following sections:
•
•
•
•
•
•
•
•

Prerequisites

Before installing the Cisco ASR 903 Router, it is important to prepare for the installation by:
•
•
•
For more instructions on how to prepare for the installation of the Cisco ASR 903 Router, see
"Preparing for Installation."

Installing the Router in a Rack

The following sections describe how to install the Cisco ASR 903 Router in a rack:
•
•
•
OL-25178-04
Prerequisites, page 3-1
Installing the Router in a Rack, page 3-1
Installing the Chassis Ground Connection, page 3-5
Installing the Fan Tray, page 3-8
RSP Installation, page 3-10
Interface Module Installation, page 3-14
Installing the Power Supply, page 3-17
Connecting the Cisco ASR 903 Router to the Network, page 3-27
Preparing the site (site planning) and reviewing the installation plans or method of procedures
(MOP)
Unpacking and inspecting the Cisco ASR 903 Router
Gathering the tools and test equipment required to properly install the Cisco ASR 903 Router
Installing the Chassis Brackets, page 3-2
Installing the Router Chassis in the Rack, page 3-3
Attaching the Cable Management Brackets, page 3-4
C H A P T E R
Cisco ASR 903 Router Hardware Installation Guide
3
Chapter 2,
3-1