Uninstalling The Cisco Microsoft Windows Usb Driver - Cisco ASR 903 Hardware Installation Manual

Connecting the Cisco ASR 903 Router to the Network
Installing the Cisco Microsoft Windows Vista USB Driver
This procedure shows how to install the Microsoft Windows Vista USB driver.
Obtain the file Cisco_usbconsole_driver.zip from the Cisco.com web site and unzip it.
Step 1
If using 32-bit Windows Vista double-click the file setup.exe from the Windows_32 folder, or if using
Step 2
64-bit Windows Vista double-click the file setup(x64).exe from the Windows_64 folder.
The Cisco Virtual Com InstallShield Wizard begins. Click Next.
Step 3
The Ready to Install the Program window appears, Click Install.
Step 4
Note
The InstallShield Wizard Completed window appears. Click Finish.
Step 5
Connect the USB cable to the PC and router USB console ports. The EN LED for the USB console port
Step 6
turns green, and within a few moments a pop up window stating "Installing device driver software"
appears. Following the instructions to complete the installation of the driver.
The USB console is ready for use.
Step 7

Uninstalling the Cisco Microsoft Windows USB Driver

This section provides instructions for how to uninstall the Cisco Microsoft Windows USB device driver.
•
•
Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver
This procedure shows you how to uninstall both the Microsoft Windows XP and 2000 USB driver. The
driver can be removed using the Windows Add Remove Programs utility or the setup.exe program.
Using the Add Remove Programs Utility
Note
Step 1 Click Start > Control Panel > Add or Remove Programs.
Scroll to Cisco Virtual Com and click Remove.
Step 2
When the Program Maintenance window appears, select the Remove radio button. Click Next.
Step 3
Using the Setup.exe Program
Note
Cisco ASR 903 Router Hardware Installation Guide
3-32
If a User Account Control warning appears, click "Allow - I trust this program..." to proceed.
"Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver"
"Uninstalling the Cisco Microsoft Windows Vista USB Driver"
Disconnect the router console terminal before uninstalling the driver.
Disconnect the router console terminal before uninstalling the driver.
Chapter 3 Installing the Cisco ASR 903 Router
OL-25178-04