Dte Ip Address Prefix Length; Data Encryption - Nextel iR1200 Administrator's Manual

NOTE: This parameter is applicable only when the Mobile Node Client in
the DCE is activated.
Command
Action AT+wpnei<"address">
Query AT+wpnei?
Range AT+wpnei=?
Parameter An IP Address consists of up to 15 characters, and is in
Values: the format "ddd.ddd.ddd.ddd".
0.0.0.0. = Default value

DTE IP Address Prefix Length

The prefix-length is the number of contiguous bits in an IP address that makes
up the network prefix (or network number plus subnet number) of the IP
address.
NOTE: This command sets the prefix length of the Mobile Node's IP
address, as specified by +WPNEI.
Command
Action AT+wv311<length>
Query AT+wv311?
Range AT+wv311=?
Parameter 2-24 = Prefix length
Values:
2 = Default value

Data Encryption

The DTE uses this command to select whether or not to encrypt the air-link
interface and determines how the air-link is encrypted. Encryption is negotiated
during the packet data registration.
RFM-4002-5015 Rev 3
AT Commands
+WPNEI
+WV311
81