Getting Started; Connecting The Modem - Nextel iR1200 Administrator's Manual

This chapter describes how to connect your modem to a computer or mobile
device in preparation for the configuration process.
This chapter includes:

Connecting the Modem

Communication Indicators
Connecting the Modem
The following table describes how to connect the modem to the computer using
the RS-232 cable.
LED (signal indicators) LED (signal indicators)
displays the modem's displays the modem's
serial interface status. serial interface status.
Status LED Status LED
displays the displays the
modem's modem's
iDEN network iDEN network
status. status.
Figure 4 – Front Panel View of the iR1200 Modem
RFM-4002-5015 Rev 3

Getting Started

Getting Started
Page 15
Page 17
Diagnostic Connector Diagnostic Connector
used to receive modem used to receive modem
diagnostic information. diagnostic information.
Reset Button used to Reset Button used to
power cycle the power cycle the
modem and re- modem and re-
establishes connection establishes connection
to the network. to the network.
15