Manual Modem Configuration; Modem Configuration - Windows 95/98/Me; Install The Modem - Nextel iR1200 Administrator's Manual

Manual Modem Configuration

In this chapter, you will learn how to manually add a modem, configure the
modem drivers and create a dial-up networking connection for Nextel.
NOTE: Use these instructions only if you did not previously install the
iDEN Packet Data Applet.
This chapter includes:
Modem Configuration – Windows 95/98/ME
Modem Configuration – Windows NT 4.0
Modem Configuration – Windows 2000
Modem Configuration – Windows 95/98/ME

Install the Modem

1 Go to Start Settings
Modems icon.
2 The Modem Properties window opens. Select the General
tab and click Add.
3 The Install New Modem window opens. Select Other.
Click Next.
4 The Install New Modem/Hardware Installation window
opens. Check the Don't run the Hardware Installation
Wizard box. Click Next.
NOTE: If this option is not available, proceed to the next step.
5 The Install New Modem/Modem Detection window
opens. Check the Don't detect my modem; I will select
RFM-4002-5015 Rev 3
Manual Modem Configuration
Page 41
Page 44
Page 48
Control Panel and click on the
41