Modem Configuration - Windows Nt; Install The Modem - Nextel iR1200 Administrator's Manual

iR1200 Modem
procedure creates the iR1200 Modem icon in the Dial-Up
Networking window.
6 In the Dial-Up Networking window, right click iR1200
Modem. Click Properties.
7 The iR1200 Modem Network window opens. Click the
Server Types tab.
NOTE: For packet data, country code and area code (under the
General Tab) should always be blank to allow s=2 to be the
telephone number.
8 Under Type of Dial-Up Server, select PPP.
Under Allowed Network Protocols, ensure that the box
next to TCP/IP is checked. Remove the check marks from
all other selection boxes.
Click the TCP/IP button.
9 The TCP/IP Settings window opens. Ensure that the
following are checked:
•
Server assigned IP address
•
Server assigned name server addresses
•
Use IP header compression
• Use default gateway on remote network
All other boxes should remain unchecked. Click OK.
10 Click OK to complete the set up
Modem Configuration – Windows NT

Install the Modem

1 Go to Start Settings
Modems icon.
44
Control Panel and click on the
nextel.com