Windows Nt; Windows 2000; Verify Tcp/Ip Protocol Installation - Nextel iR1200 Administrator's Manual

iR1200 Modem

Windows NT

1 From your desktop, double-click the My Computer icon to
open the My Computer window.
2 Double-click the Dial-Up Networking icon to open the
Dial-Up Networking window.
3 The Dial-Up Networking window opens and displays the
Phone book entry to dial heading.
If the Dial-Up Networking window displays the Install
prompt then dial-up networking has not been installed.
4 Click Close to close the Dial-Up Networking window.

Windows 2000

1 From your desktop, double-click the My Computer icon to
open the My Computer window.
2 Double-click the Control Panel icon. The Control Panel
window opens.
3 Double-click the Networking and Dial-Up Connections
icon. The Make New Connection window should appear,
indicating that dial-up networking is installed.
4 Click Close to close the Network and Dial-up
Connections window.

Verify TCP/IP Protocol Installation

The following table describes the steps for verifying TCP/IP Protocol and Dial-
up Adapter.
36 nextel.com