Verbose Result Codes; Extended Result Codes - Nextel iR1200 Administrator's Manual

Action ATt
Query
Range

Verbose Result Codes

This command sets your preference for the result code format. It allows the
computer to select either Terse or Verbose result code formats.
Command
Action ATv <setting>
Query AT&v
Range
Parameter 0 = Numeric result code format
Values:
1 = Verbose result code format

Extended Result Codes

This command provides an extended result code selection.
Command
Action ATx <setting>
Query AT&v
Range
Parameter 0, 1 = The modem does not return the BUSY or NO
Values: DIALTONE result codes.
2 = The modem might return the NO DIALTONE result
code if appropriate, but does not return the BUSY result
code.
3 = The modem may not return the BUSY result code, if
RFM-4002-5015 Rev 3
AT Commands
V
X
71