Other Useful At Commands; Answer; Command Mode Echo - Nextel iR1200 Administrator's Manual

AT+WS53? AT+WS53?
AT+WS50? AT+WS50?
AT+WPSTATE AT+WPSTATE
AT+WPREG AT+WPREG

Other Useful AT Commands

The following table outlines other common AT commands for your reference.

Answer

This command instructs the DCE to immediately connect to the call and start
the answer sequence, as appropriate for the selected service.
Command
Action ATa
Query
Range

Command Mode Echo

The setting for this parameter determines whether or not the DCE echoes
characters received from the DTE during command state and online command
state.
Command
Action ATe <echo>
Query AT&v
Range
Parameter 0 = Disabled command mode character echo.
RFM-4002-5015 Rev 3
AT Commands
Checks Signal Quality
Check Signal Strength
Checks mobile IP
registration
DTE IP Address
A
E
67