Important Safeguards - ElectrIQ PLM12000HP User Manual

7. Make sure the unit is upright and there are no obstructions
to the air inlets and outlet grills
8. Fix the other end of the hose to the air-outlet window kit
Note:
The window kit is only designed to be installed with sliding or sash windows or doors. The window kit is not
designed or to be used with any other style of windows. However the fish tail adaptor can be used with most windows /
doors.
When using the cooling mode ensure that the opening left is as small as possible.
The best form of installation is through a wall duct.
Please note that the unit will need to be vented out in heating mode, ideally through the wall. By properly venting you
expel cold air from your room while efficiently heating it.

Important safeguards

The length of the soft hose extends from 28 cm to 150 cm. If hose is extended above this
length the unit may malfunction and this can invalidate the warranty.
The outlet vent must be well ventilated and not obstructed as this will cause the unit to
overheat. Avoid bending the air hose more than 30e
Page 7 of 16