Important Safeguards - ElectrIQ SILENT10 User Manual

5. Make sure the unit is upright and there are
no obstructions to the air inlets and outlet grills
6. Fix the other end of the hose to the air-outlet window kit
Note:
The window kit is only designed to be installed with sliding or sash windows or doors. The window kit
is not designed or to be used with any other style of windows. However the fish tail adaptor can be used with
most windows / doors.
When using the cooling mode ensure that the opening left is as small as possible.
The best form of installation is through a wall duct. By properly venting you expel hot air from your room while
efficiently cooling it.

Important safeguards

The length of the soft hose extends from 28 cm to
150 cm. If hose is extended above this length the unit
may malfunction and this can invalidate the warranty.
The outlet vent must be well ventilated and not
obstructed as this will cause the unit to overheat.
Avoid bending the air hose more than 30 degrees.
Page 6 of 13