Table 1-2. Product Comparisons - HP DesignJet 500 Service Manual

Omnibook 500
Celeron (500 or 600 MHz) or
Processor*
Pentium III (600 to 750 MHz).
Memory 64, 128, or 256 MB SDRAM in
system slot. Expandable to
512 MB.
12.1-inch TFT XGA display.
Display
Video AGP graphics interface.
4 or 8 MB video RAM with 32-
or 64-bit graphics interface
and 64-bit graphics controller.
3D and OpenGL graphics
support.
Up to 16M colors (XGA).
Zoomed Video enabled.
Operating System Windows 98 or Windows 2000
preinstalled.
HP Toptools 5.0.
HP Toptools
APM 1.2.
Power Management
ACPI compliant.
On, Standby, Hibernate, Off.
Power States
* Intel Mobile Pentium or Mobile Celeron Processor. Dual-speed processors use Intel SpeedStep Technology.
1-2 Product Information

Table 1-2. Product Comparisons

Omnibook 6000
Celeron (550 to 650 MHz) or
Pentium III (600 to 850 MHz).
64 or 128 MB SDRAM in
system slot. Expandable to
512 MB.
15.0- or 14.1-inch TFT XGA
or 15.0-inch TFT SXGA+
display.
AGP graphics interface.
4 or 8 MB video RAM with 32-
or 64-bit graphics interface
and 64-bit graphics controller.
3D and OpenGL graphics
support.
Up to 16M colors (XGA).
Zoomed Video enabled.
Windows 95, Windows 98, or
Windows 2000 preinstalled.
HP Toptools 4.5 to 5.0.
APM 1.2.
ACPI compliant.
On, Display-off, Standby,
Hibernate, Off.
Omnibook 900B
Pentium III (450, 500, 600, or
650 MHz).
64 MB SDRAM on
motherboard. Expandable to
160 or 320 MB.
13.3-inch TFT XGA or 12.1-
inch TFT SVGA display.
AGP graphics interface.
4 MB video RAM with 32-bit
graphics interface and 64-bit
graphics controller.
3D and OpenGL graphics
support.
Up to 16M colors (XGA).
Zoomed Video enabled.
Windows 95, Windows 98,
Windows NT, or Windows
2000 preinstalled.
HP Toptools 3.0 to 5.0.
APM 1.2.
ACPI compliant.
On, Display-off, Standby,
Hibernate, Off.
HP Omnibook 500