Removing A Mini-Pci Card (Certain Models Only) (User-Replaceable); Table 2-6. Mini-Pci Card Replacement Part Numbers - HP DesignJet 500 Service Manual

Removing a Mini-PCI Card (certain models only)
(User-Replaceable)
Important
If the notebook is an option code ARE (for Malaysia), the mini-PCI card can be replaced
only by the regional repair center in Taiwan. Contact the HP Call Center in your region
for shipping information.
Notebooks repaired in China (option code AB2), Malaysia (option code ARE), or South
Africa (option code ACQ) can use only the mini-PCI cards with regulatory labels, as
shown in the following table and in Chapter 4.
Description
Card, mini-PCI (HW modem)
Card, mini-PCI (HW modem with regulatory
labels for China, Malaysia, or South Africa)*
Card, mini-PCI (LAN/modem)
Card, mini-PCI (LAN/modem with regulatory
labels for China, Malaysia, or South Africa)*
* Required for repair in China (option code AB2), Malaysia (option code ARE), or South Africa
(option code ACQ).
Caution
Provide proper grounding and handle the card only by its edges, or you might damage it through
electrostatic discharge.
Required Equipment
None.
Removal Procedure
1. Unplug the AC adapter, if present, and remove the battery.
2. Remove the power button panel (page 2-9).
3. Open the keyboard (page 2-10, though step 4). You don't need to disconnect the keyboard cables.
2-14 Removal and Replacement

Table 2-6. Mini-PCI Card Replacement Part Numbers

Part Number Exchange Part Number
F2157-60928
F2157-60929
F2072-60902
F2072-60994
HP Omnibook 500