Download Print this page

HP DesignJet 500 Service Manual: Removing The Main Battery (user-replaceable); Figure 2-2. Removing The Main Battery

Hewlett-packard omnibook service manual.
Hide thumbs

Advertisement

Removing the Main Battery
(User-Replaceable)
One or two plug-in modules can be inserted in the module bays in the expansion base. The computer
itself has no module bays.
Required Equipment
None.
Removal Procedure
Slide the battery's release latch, then lift the battery out of its compartment.
Reassembly Note
Insert the front end of the battery into the battery compartment, then press the back end in until it
clicks into place.
2-4
Removal and Replacement
Figure 2-2. Removing the Main Battery
HP Omnibook 500

Advertisement

Troubleshooting

   Related Manuals for HP DesignJet 500

This manual also for:

Omnibook 500

Comments to this Manuals

Symbols: 0
Latest comments: