Performing Scan To Ftp Server Operations; Flow Of Scan Operation - Konica Minolta C350 User Manual

8
8.8

Performing Scan to FTP Server Operations

The Scan to FTP Server operation is used to send the image data
scanned on this machine to an FTP server.
Note
To perform Scan to FTP Server operations, a network environment
with an FTP server is required.
8.8.1

Flow of Scan Operation

Procedure
1
Using PageScope Web Connection, register FTP servers (up to five).
"Registering FTP Servers" on page 8-48
2
If "Use Proxy" was set to "Yes" on the FTP Server Registration page,
set the proxy server.
"Setting the Proxy Server" on page 8-51
3
Using PageScope Web Connection, perform one-touch key
registration or temporary key registration.
"Registering Destinations in Advance" on page 8-25
4
Using this machine's control panel, specify the destination of the
scanned data.
"Setting the Destination" on page 8-52
5
Using this machine's control panel, set the scan mode and document
designation.
"Scan Mode Screen" on page 8-14 and "Original Setting Screen" on
page 8-16
6
Set the document, and then press the [Start] key on this machine's
control panel.
The document is scanned. The scanned data is sent to the FTP
server.
If a URL notification destination was specified, information indicating
the storage location of the scanned data is sent by e-mail.
8-46
Using the Scan Functions
C350