Konica Minolta C350 User Manual page 122

Using the Scan Functions
Authentication Method
Domain Name
Login Name
Password
[Check LDAP Settings]
button
Using this machine's control panel
A portion of the LDAP parameters can be entered from this machine's
control panel.
1
On this machine's control panel, press the [Utility] key, touch [Admin.
Mode], and then enter the administrator access code.
2
Touch [Network Setting], then [LDAP].
3
Specify settings for the "LDAP Server Address", "SSL/TLS", "Port
Number", and "Search Base" parameters on the Network Setting
screen. Specify settings for the "Authentication System", "Login
Name", and "Password" parameters on the Authentication screen.
Specify settings for the "Max. Number of Searches" and "Connection
Timeout" parameters on the Others screen.
C350
Set the LDAP authentication method.
If "GSS-SPNEGO" is selected, the DNS server in the TCP/IP
settings must be specified (refer to page 12-50).
Settings: "Anonymous", "Simple", "Digest-MD5/CRAM-MD5",
or "GSS-SPNEGO"
If the authentication method is set to "GSS-SPNEGO", set the
domain name used with DNS.
Settings: Up to 64 characters
Set the login name used to log in to the LDAP server.
Settings: Up to 255 characters
Set the password used to log in to the LDAP server.
Settings: Up to 128 characters
Checks whether a connection can be established correctly
using the settings entered here.
8
8-35