Sending Data To A Server (Scan To Ftp); Scan To Ftp - Konica Minolta bizhub C252 Network Scanner Operations

3
3.4

Sending data to a server (Scan to FTP)

Scan to FTP

The Scan to FTP operation can be used in a network environment with an
FTP server. The scanned data is sent to a specified folder in an FTP server
on the network.
This function is suitable for sending data of a large size such as high-
resolution images.
The methods described below are available for specifying the destination.
The methods can also be combined, for example, by selecting a group
destination, then adding other destinations through direct input.
Transmission may not be possible if the destination server has placed
limitations on the document name. Because the document name becomes
the file name at the time of transmission, consult your network administrator
when specifying the document name.
Note
If a mail server is available on the network, the e-mail notification function
can be used to send an e-mail message containing notification of the
storage location of the scan data. For details on the e-mail notification
function, refer to "Specifying e-mail settings" on page 3-84.
Note
For the FTP transmission procedure, refer to "Sending the scanned data
as files (FTP)" on page 2-5.
3-22
Scanning documents
bizhub C252