Using A Parallel Connection - Konica Minolta C350 User Manual

Printer controller guide
Hide thumbs Also See for C350:
Table of Contents

Advertisement

Connecting to a Computer
3.2

Using a Parallel Connection

Use a parallel cable (IEEE 1284, Centronics) to connect the parallel port
on this machine to the parallel port on the computer.
The parallel port on this machine supports IEEE 1284 Type B.
Note
To connect this machine to the computer using a parallel connection,
the optional local interface kit is required.
Always use a parallel cable that is shielded. Failure to do so may result
in radio frequency interference.
Memo
To install the printer driver using Plug and Play, use the parallel cable
to connect this machine to the computer when you install the printer
driver (refer to "Installing the Printer Driver Using Plug and Play" on
page 4-7).
Connection procedure
1
Turn this machine and the computer off.
2
Connect one end of the parallel cable to the parallel port (printer port)
on the computer.
3
Connect the other end of the parallel cable to the parallel port on the
back of this machine. Use the two clips to secure the interface cable
connector.
This machine is now connected to the computer.
C350
3
3-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents